Ep Series Round Rail Type CNC Electric Screw Press

• After-sales Service: Overseas Services
• Type: Screw Press
• Forging Forming Method: Mold Forging
• Model NO.: EP
• Power Source: Hydraulic Pressure
• Feature: High Efficiency
• Certification: CE
• Warranty: 12 Months
• Customized: Non-Customized
• Advantage: Work Flexible
• Condition: New
• Stroke: 7-30/Min
• Slider Stroke: 300-1000mm
• Daylight: 380-1600mm
• Nominal Force: 1600-100000kN
• Transport Package: as Required
• Specification: ce
• Origin: China
• HS Code: 8462919000
• Production Capacity: 100 Sets/Year

Product Description

EP Series Round Rail Type CNC Electric Screw Press has the advantages of few parts,short transmission chain,simple structure,convenient operation and maintenance,stable running,low noise,etc:
·Anti leaning load capacity is stronger ,multi die forging capacity has more advantages.
Energy control is accurate,the product forming a good consistency.
No lower dead point,so the ram will not jam.
Using the unique screw and flywheel connection structure.
High capacity of equipment,great fighting capacity.
·The use of advanced lubrication technology,greatly extended the life of the screw pair.
Energy-saving and environmental protection, after inspection, compared with the press of the same specification, the energy
saving can reach more than 48.5%.
 

		Main Parameters		Unit	EP-160	EP-300	EP-400A	EP-630B	EP-1000P	EP-1600P	EP-630A	EP-800	EP-1000	EP-1600
				Belt drive							Gear drive
		Nominal Force		kN	1600	3000	4000	6300	10000	16000	6300	8000	10000	16000
( )		Allowable strike force (center loading)		kN	2500	4800	6400	10000	16000	25000	10000	12000	16000	25000
		Motion part energy		kJ	10	26	40	90	160	290	90	105	160	290
		Ram Stroke		mm	300	400	410	500	550	650	500	500	550	650
		No. of Stroke		Min-1	30	27	24	21	17	15	21	20	17	15
		Min. Die Height		mm	380	400	480	600	700	800	600	600	700	800
		Ram Bottom Dimension	Front/Back	mm	560	660	760	920	1000	1250	920	920	1000	1250
			Left/Right	mm	540	540	600	690	800	930	670	690	800	930
		Table Dimension	Front/Back	mm	600	670	820	920	1000	1250	920	920	1000	1250
			Left/Right	mm	560	570	730	800	900	1100	800	800	900	1100
		Table Bolster Height		mm	120	120	120	180	180	200	180	180	180	200
		Overall Dimension	Left/Right	mm	2800	2800	3490	2920	3560	5050	2920	2920	3560	5050
			Front/Back	mm	1700	1850	1910	2670	3000	4400	2670	2670	3000	4400
			Height	mm	3730	4300	4500	5545	6395	6340	5545	5545	6395	6340
		Main Motor Power		kw	22	45	55	110	2×90	2×132	110	132	132	2×132
		Height above the Ground		mm	3650	4330	4260	5245	5628	5445	5245	5245	5628	5445

 

		Main Parameters		Unit	EP-2000	EP-2500	EP-3150	EP-4000A	EP-6300	EP-8000A	EP-10000
		Nominal Force		kN	20000	25000	31500	40000	63000	80000	100000
( )		Allowable strike force (center loading)		kN	32000	40000	50000	64000	100000	128000	160000
		Motion part energy		kJ	380	550	700	1000	1600	2300	3600
		Ram Stroke		mm	650	700	700	750	850	900	1000
		No. of Stroke		Min-1	15	14	13	11	8	8	7
		Min. Die Height		mm	900	1050	1120	1200	1380	1500	1600
		Ram Bottom Dimension	Front/Back	mm	1300	1450	1500	2000	2100	2600	2800
			Left/Right	mm	950	1250	1250	1330	1560	1700	1780
		Table Dimension	Front/Back	mm	1300	1450	1500	2000	2150	2600	2800
			Left/Right	mm	1120	1400	1420	1600	1820	2000	2200
		Table Bolster Height		mm	200	280	280	300	320	350	350
		Overall Dimension	Left/Right	mm	5050	4175	7300	7200	8300	10300	10300
			Front/Back	mm	4400	3890	6500	7200	7500	7800	8200
			Height	mm	6500	8535	8930	10150	10640	12865	14200
		Main Motor Power		kw	2×160	2×220	2×250	2×315	2×500	2×580	2×710
		Height above the Ground		mm	5545	7335	7000	8030	8720	10205	11700